Product Name: LED Panel Light 150mm
Model: P0150
LED Brand: Taiwan
Input Voltage: 110-220VAC
Working Temp.: -10°c~40°c
























1. Aluminum housing with white outer surface, ultra-thin design conception.
2.Color option:White or silver color
3. Matched with a high efficiency constant current driver.
4. Energy saving, low heat, no UV or IR radiation, no mercury;
5. Recessed installation;
6. High quality PMMA diffuser with over 90% light transmition achieves even and soft light output.
7. Application: For ceiling or wall lighting. It can be used in shopping malls, hotel, meeting room, commercial theatre,museum and so on.
8.Package Info: Ctn size 55*48*29cm, 30pcs/ctn, Gross Weight: 19KG/ctn.
9. Warranty: 24 months.





















P0150 adopts 24PCS 0.5W  LED as luminous body, matched with high
efficient  LGP  and elegant aluminium housing which emit high light
output. No glaring, stable quality and long life-span. It can be installed
into ceiling or wall.As a replacement of traditional downlight , it is
widely used for hotel, restaurant , commercial & residential lighting.

Housing: Aluminium material with good heat  conduction
Adopts efficient light guide plate of PMMA material, no glaring
High efficient and wide voltage constant current driver keeps stable
current of the product
Elegant design, ultra-thin, and convenient for usage.

Measurement: 163*16mm
Weight: 370g
Beaming Angel: 110degree
Color Temp.: 6000K (White)/4200K(Neutral White)/3000K(Warm White)
Working Temperature: -10degree~40degree
Brightness: 640 lm (White)/640lm (Natural White)/595 lm (Warm White)

Electric Specs
Input Voltage: 110~220VAC
Input Current: 57mA@220VAC
Power Consumption: 11W

Luminance Distribution Curve & Average Illuminance Figure
















White , 110degree
















Neutral White , 110degree
















Warm White , 110degree













1. Make sure the power is off.
2. Drill a suitable mounting on the ceiling according to the light’s cutout.
3. Connect input end of LED converter to commercial power(110V-220V), and make sure connecting is right.
4. Put LED driver at suitable place on ceiling.
5. Pinch both springs (showed as 1), then push light into installation hole (showed as 2).
Make sure the light fixed well.
6. Re-checking everything was connected well before turn on the power.

Keep LED down light away from flammable materials.
No cover is allowed on the down light.
(as picture shows).